Lubrication Oil & Grease Portal of India

Shell Turbo Fluid DR 46 is a fire-resistant hydraulic and lubricating fluid based on Tri-Aryl Phosphates manufactured from carefully selected raw materials.

Applications

1. Lubrication of steam- and gas turbines Shell Turbo Fluid DR 46 can be used as lubrication oil for main bearings in steam- and gas turbines, generators and cooling pumps.
2. Hydraulic fluid It can be used as hydraulic fluid in electrohydraulic governor control systems in steam and gas turbines.

Advice on applications not covered in this leaflet may be obtained from your Shell Representative.

Performance Features and Advantages

• Excellent fire resistant Turbo DR 46 is inherently fire-resistant, offering high flash point, high fire point and high auto ignition temperature. It eliminates the risk of fire, potentially caused by mineral oil products.
• Good oxidation stability To provide long service life under normal operating conditions.
• Good hydrolytic stability Turbo DR 46 is to a great extend able to withstand rapid decomposition of the Ester base fluid under the influence of moisture and water in the oil system.
• Good demulsibility To enable rapid separation from water for improved service intervals.
• Good air release Rapid air-release minimises air entrapment in lubrication and governor control systems in order to ensure safe operation of the whole equipment.
• Low foaming Minimal tendency for foaming to provide proper lubrication and heat transfer.

Specification and Approvals Shell Turbo DR 46 is approved by relevant original equipment manufacturers, e.g. ABB, GEC, Siemens, Westinghouse.

Shell Turbo DR 46 appears in the FM Approvals Guide against project identification number 3024866 as an approved fire resistant hydraulic fluid for turbine applications.

Compatibility’s
Packing, seals and hoses Following materials are recommended for use with Turbo DR 46: Butyl rubbers, Nylon, PTFE, VITON rubber (depending on operation temperature range).

Paintings Attention must be paid to painted surfaces. Epoxy paints can be seen as resistant to DR46.

Fluid conditioning In order to ensure a long fluid life it is essential to keep the fluid clean and dry and to maintain a low level of acidity. Special advice for the treatment of the product in service can be requested from your supplier.

Health and Safety Guidance on Health and Safety are available on the appropriate Material Safety Data Sheet which can be obtained from your Shell representative.

Protect the environment Take used oil to an authorised collection point. Do not discharge into drains, soil or water.

Typical Physical Characteristics

These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.

Turbo Fluid DR 46 NA Shell Turbine Oils prices, buy, cost dealers, suppliers, vendors, wholesalers, retailers, traders, resellers and distributors in Mumbai, Navi Mumbai, Bhiwandi, Thane in Maharashtra and all India.

Shell Turbo Fluid DR 46 is also shipped to following places in Maharashtra Achalpur, Aheri, Ahmadpur, Ahmednagar, Ajara, Akola, Akot, Ambad (Jalna), Ambernath, Amravatee Amravati, Amrawati (Nandgaon Peth), Anjangaon, Ashti, Aurangabad, Ausa Phase - I, Badlapur, Balapur, Baramati, Barshi - Takli, Basmat, Beed, Bhadravati, Bhandara (Gadegaon), Bhatkuli, Bhigwan (Sinarmas), Bhivapur, Bhiwandi, Bhokardan, Bhum, Bhusaval, Brahmanvel, Buldhana, Butibori, Butibori (Nagpur), Chakan Industrial Area, Chalisgaon, Chandrapur, Chandrapur (CGGC), Chandur Bazar, Chandur Rly., Chikalthana, Chikhali, Chimur, Chincholi Indl.Area, Chiplun (Gane-Khadpoli), Chiplun (Pohali / Kherdi).

Dabhol Portbase - I, Dapoli, Darwha, Daryapur, Deglur Phase-I, Deoli, Deoulgaonraja, Devri, Dhamangaon, Dhanora, Dharni (Melghat), Dharur, Dhule, Digras, Dindori, Dombivli, Gadchiroli, Gadhinglaj, Gangakhed, Ghatanji, Ghugus, Gokul - Shirgaon, Gondia, Gondpimpri, Goregaon, Halkarni, Hinanghat, Hingoli, Indapur, Islampur  Indl. Area, Jafrabad, Jalgaon, Jalgaon 1&2, Jalna, Jamkhed (Mini), Jath (Mini) Indl. Area, Jejuree, Jejuri, Jintur, Kadegaon (Mini) Industrial Area, Kadegaon Indl.Area, Kagal Hatkanangale, Kalamb, Kalamb (Osmanabad), Kalamnuri, Kalmeshwar, Kalyan Bhivandi, Kamti Kanhan, Kandhar, Karad, Karanja, Karmala (G.C.) Indl. Area, Katol, Kavathemahankal (Mini) Indl.Area, Kesurdi (Khandala Ph.I), Khamgaon, Kharadi Knowledge Park, Khultabad, Kinwat, Kolhapur, Koregaon, Krushnur (Nanded) SEZ, Kudal, Kuhi, Kurduwadi (Madha) Mini Indl Area, Kurkhed, Kurkumbh.

Lakhandur, Latur, Lonand, Lonar, Lote-Parshuram, Mahad, Mahagaon, Mahape, Malegaon (Mini), Malegaon Industrial Area (Textile Park), Malkapur, Mangalurpir, Mangalwedha (G.C.) Indl.Area, Manora, Maregaon, Marol, Mehekar, Mhaswad, MIDC, Millennium Business Park, Mira Bhayander, Mohadi, Moregaon (Arjuni), Morshi, Mul, Murbad, Murtijapur, Nagbhid, Nagothane, Nagpur, Nagpur (Hingna), Nanded, Nanded (CGGC) Kushnur, Nandgaon - Khandeshwar, Nandgaon Peth, Nandurbar, Narkhed, Nashik (Ambad), Nashik (Satpur), Nashik Infotech Park, Nasik, Navapur, Newasa, Nilanga, Omerga, Osmanabad, Paithan, Palus (Mini) Industrial Area, Palus (Wine Park), Pandare, Panvel, Parbhani, Parshioni, Parsodi IT Park, Partur, Patalganga, Patan, Patod, Patur, Peth, Phaltan, Pimpri Chinchwad, Pune, Pusad.

Rahuri, Raigad, Rajiv Gandhi Infotech Park,  Hinjawadi, Rajura Phase-I, Ramtek, Ranjangaon, Ratnagiri, Risod, Roha, Samudrapur, Sangameshwar, Sangli, Sangli I.T.Park, Sangli Miraj Indl.Area (Kupwad), Sangli Miraj Industrial Area (Miraj), Sangrampur, Saoner, Satara, Satara IT Park, Shahade (Mini), Shendra, Shindewahi, Shirala (G.C.) Indl.Area, Shiroli, Shrirampur, Sindhudurg, Sinnar, Solapur, Solapur Indl. Area, Solapur Infotech Park, Supa Parner, Surgana, Talawade Software Park, Talegaon Industrial Area, Taloja, Tarapur, Telhara, Tembhurni (G.C.)Indl.Area, Thane (Wagle Estate), Tiroda, Tiwasa, TTC Industrial Area, Tumsar, Umerkhed, Umred, Usar, Vaijapur, Vile-Bhagad, Vinchur, Vita Indl.Area (G.S.), Wai, Waluj, Wani, Wardha, Warora (CGGC), Warud, Washim and Yavatmal.